View IE-78K0-NS-PA_2073153.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document no. u16109ej1v0um00 (1st edition) date published june 2002 n cp(k) printed in japan user?s manual IE-78K0-NS-PA performance board target devices 78k/0 series ? 2002
user?s manual u16109ej1v0um 2 [memo]
user?s manual u16109ej1v0um 3 v40 family is a trademark of nec corporation. windows is either a registered trademark or a trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation.
user?s manual u16109ej1v0um 4 m8e 00. 4 the information in this document is current as of may, 2002. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above). ? ? ? ? ? ?
user ? s manual u16109ej1v0um 5 regional information some information contained in this document may vary from country to country. before using any nec product in your application, piease contact the nec office in your country to obtain a list of authorized representatives and distributors. they will verify: ? device availability ? ordering information ? product release schedule ? availability of related technical literature ? development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) ? network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. nec electronics inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 fax: 408-588-6130 800-729-9288 nec electronics hong kong ltd. hong kong tel: 2886-9318 fax: 2886-9022/9044 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-528-0303 fax: 02-528-4411 nec electronics shanghai, ltd. shanghai, p.r. china tel: 021-6841-1138 fax: 021-6841-1137 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 fax: 02-2719-5951 nec electronics singapore pte. ltd. novena square, singapore tel: 253-8311 fax: 250-3583 nec do brasil s.a. electron devices division guarulhos-sp, brasil tel: 11-6462-6810 fax: 11-6462-6829 j02.4 nec electronics (europe) gmbh duesseldorf, germany tel: 0211-65 03 01 fax: 0211-65 03 327 sucursal en espa ? a madrid, spain tel: 091-504 27 87 fax: 091-504 28 60 v lizy-villacoublay, france tel: 01-30-67 58 00 fax: 01-30-67 58 99 succursale fran ? aise filiale italiana milano, italy tel: 02-66 75 41 fax: 02-66 75 42 99 branch the netherlands eindhoven, the netherlands tel: 040-244 58 45 fax: 040-244 45 80 branch sweden taeby, sweden tel: 08-63 80 820 fax: 08-63 80 388 united kingdom branch milton keynes, uk tel: 01908-691-133 fax: 01908-670-290
user?s manual u16109ej1v0um 6 introduction product overview the IE-78K0-NS-PA is used in combination with an in-circuit emulator (ie-78k0-ns), emulation board (ie-780 -ns-em1, ie-780 -ns-em4), and i/o board (ie-78k0- ns-p0 ) to debug products of the 78k/0 series of 8-bit single-chip microcontrollers. target readers this manual is intended for engineers who perform debugging of systems that employ the 78k/0 series of 8-bit single-chip microcontrollers using the IE-78K0-NS-PA and an in-circuit emulator (ie-78k0-ns), emulation board (ie-780 -ns-em1, ie-780 -ns- em4), and i/o board (ie-78k0-ns-p0 ) together. purpose the purpose of this manual is to help the user understand the debugging functions that are available by using the IE-78K0-NS-PA and the in-circuit emulator (ie-78k0-ns), emulation board (ie-780 -ns-em1, ie-780 -ns-em4), and i/o board (ie-78k0- ns-p0 ) together. organization when using the IE-78K0-NS-PA, please refer to the manual (this manual) that comes with the IE-78K0-NS-PA as well as the manual that comes with the in-circuit emulator (ie-78k0-ns), emulation board (ie-780 -ns-em1, ie-780 -ns-em4), and i/o board (ie-78k0-ns-p0 ). ie-78k0-ns user?s manual IE-78K0-NS-PA user?s manual (this manual) ? general ? part names ? installation ? external interface ? general ? part names ? installation ? external sense specifications ? cautions ie-78k0-ns-p0 user?s manual ie-780 -ns-em1 ie-780 -ns-em4 user?s manual ? general ? part names ? installation ? general ? part names ? installation ? differences between target devices and target interface circuits
user?s manual u16109ej1v0um 7 how to read this manual to understand the overall functions of the IE-78K0-NS-PA: read this manual in the order of the contents. to understand the basic specifications: refer to chapter 1 general and chapter 2 part names . for how to connect the ie-78k0-ns, ie-780 -ns-em1, ie-780 -ns-em4, and ie- 78k0-ns-p0 and make settings to debug 78k/0 series products: refer to chapter 3 installation . terminology the meanings of the terms used in this manual are described in the table below. term meaning target device this is the device to be emulated. target system this is the system to be debugged. this includes the target program and the hardware provided by the user. when defined narrowly, it includes only the hardware. ie system this refers to the combination of an in-circuit emulator (ie-78k0-ns), emulation board (ie-780 -ns-em ), and i/o board (ie-78k0-ns-p0 ). conventions data significance: higher digits on the left and lower digits on the right note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information related documents the related documents (user?s manuals) indicated in this publication may include preliminary versions. however, preliminary versions are not marked as such. document name document no. ie-78k0-ns in-circuit emulator u13731e IE-78K0-NS-PA performance board this manual id78k series integrated debugger ver. 2.30 or later operation (windows tm based) u15185e caution the related documents listed above are subject to change without notice. be sure to use the latest version of each document for designing.
user?s manual u16109ej1v0um 8 contents chapter 1 general .......................................................................................................... .................11 1.1 system configuration ........................................................................................................ ...........11 1.2 hardware configuration...................................................................................................... ..........13 1.3 basic specifications........................................................................................................ ..............14 chapter 2 part names...................................................................................................... ..............16 2.1 parts of main unit .......................................................................................................... ................17 2.2 external sense probe names ................................................................................................. ......18 chapter 3 installation ..................................................................................................... .............19 chapter 4 external sense specifications...........................................................................26 chapter 5 cautions......................................................................................................... .................27
user?s manual u16109ej1v0um 9 list of figures figure no. title page 1-1 IE-78K0-NS-PA system configuration .......................................................................................... .................... 12 1-2 basic hardware configuration................................................................................................ ........................... 13 2-1 performance board ........................................................................................................... ................................ 17 3-1 connecting emulation board (ie-780 -ns-em1) .......................................................................................... 20 3-2 connecting i/o board (ie-78k0-ns-p0 ) and emulation board (ie-780 -ns-em4) ..................................... 22 3-3 connecting external sense probe ............................................................................................. ....................... 24 3-4 connecting emulation probe.................................................................................................. ........................... 25
user?s manual u16109ej1v0um 10 list of tables table no. title page 1-1 list of functions (max. specifications) ..................................................................................... ........................14 2-1 correspondence between connector no. and color of cable ..................................................................... .....18 2-2 bit configuration when connecting external sense probe to extcn1............................................................ 18 2-3 bit configuration when connecting external sense probe to extcn2............................................................ 18 4-1 electrical specifications of external sense................................................................................. .......................26
user?s manual u16109ej1v0um 11 chapter 1 general the IE-78K0-NS-PA is a development tool for effectively debugging hardware and software in which a 78k/0 series 8-bit single-chip microcontroller is used as the target device. this chapter describes the system configuration and basic specifications of the IE-78K0-NS-PA. 1.1 system configuration figure 1-1 shows the system configuration of the IE-78K0-NS-PA.
chapter 1 general user?s manual u16109ej1v0um 12 figure 1-1. IE-78K0-NS-PA system configuration host machine pc-9800 series or ibm pc/at tm and compatibles integrated debugger id78k0-ns (sold separately) device file note (available separately) control software ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? interface board ie-70000-98-if-c (sold separately) interface board ie-70000-pc-if-c (sold separately) interface board ie-70000-pci-if-a (sold separately) or ie-70000-cd-if-a (sold separately) ns card cable mc card cable fg cable ie-78k0-ns (sold separately) interface cable (ns if cable) ac adapter ie-70000-mc-ps-b (sold separately) + + + + + IE-78K0-NS-PA (this product) in-circuit emulator interface cable interface card emulation board ie-780 -ns-em1 (sold separately) i/o board ie-78k0-ns-p0 (sold separately) emulation board ie-780 -ns-em4 (sold separately) emulation probe note (sold separately) conversion socket/conversion adapter note (sold separately) external sense probe note for the device file, emulation probe, and conversion socket/conversion adapter, refer to the ie-780 -ns- em1 or ie-780 -ns-em4 user ? s manual.
chapter 1 general user ? s manual u16109ej1v0um 13 1.2 hardware configuration the position of the IE-78K0-NS-PA is shown in figure 1-2. figure 1-2. basic hardware configuration ie-78k0-ns (sold separately) ie-780 -ns-em1 or ie-78k0-ns-p0 + ie-780 -ns-em4 IE-78K0-NS-PA (this product) emulation probe (sold separately) dedicated bus interface ie system host machine interface board (sold separately) interface card (sold separately) 78k0 main board 78k0 performance board i/o board (sold separately) and emulation board (sold separately) external sense probe
chapter 1 general user?s manual u16109ej1v0um 14 1.3 basic specifications table 1-1. list of functions (max. specifications) (1/2) parameter ie-78k0-ns single unit functions functions added by combining ie-78k0-ns with IE-78K0-NS-PA supervisor v40 tm (operating frequency: 16.0 mhz) target device 78k/0 series ( pd780 ) system clock according to specification of emulation board (sold separately) external pulse input clock supply internal mounted on emulation board (sold separately) substitute memory capacity 64 kb internal rom 4 kb internal high-speed ram 64 bytes internal low-speed ram 128 bytes mapping unit external expansion memory 8 kb emulation function ? real-time execution ? break execution ? step execution real-time internal ram monitor 2 kb of entire data memory space event detection ? program execution detection: 2 (fetch) (brs1, brs2) ? bus event detection: 4 (access) (bra1 to bra4) ? program execution detection: 8 (fetch) (brs3 to brs10) ? bus event detection: 8 (access) (bra5 to bra12) event integration ? trigger condition ? path condition ? delay condition ? trace qualify condition break factors ? external trigger detection (extin: 1) ? trigger output out (open-drain output: 1) ? event break ? manual break ? command break ? fail-safe break ? external event inputs (extcn1: 8) ? timeout break trace factors ? all traces ? qualify trace (access only) ? section trace (both fetch and access) (inter-event trace) note trace capacity 32 bits 8 kb 48 bits 8 kb real-time trace trace contents ? address ? data ? status ? external sense traces: 16 (8 of which (extcn1) can be used as external single event inputs) ? time stamp ? snap shot note events use brs3 to brs10 and bra5 to bra12 added by the IE-78K0-NS-PA.
chapter 1 general user ? s manual u16109ej1v0um 15 table 1-1. list of functions (max. specifications) (2/2) parameter ie-78k0-ns single unit functions functions added by combining ie-78k0-ns with IE-78K0-NS-PA execution time measurement up to 4 min 28 s, resolution: 62.5 ns inter-event time measurement ? ? resolution: changeable between 160 ns and 20.56 s ? maximum measurement time when resolution is set to 160 ns: approximately 11 minutes when resolution is set to 20.56 s: approximately 24 hours note coverage ? 64 kb space (read, write, fetch) dmm ? 16 events note target interface emulation probe (sold separately) provided for each target device shape host interface dedicated bus interface low-voltage support according to specification of emulation board (sold separately) host machine pc-9800 series, or ibm pc/at and compatibles power supply dc 5 v dimensions w240 d197 h73 (mm) note events use brs3 to brs10 and bra5 to bra12 added by the IE-78K0-NS-PA.
user?s manual u16109ej1v0um 16 chapter 2 part names this chapter introduces the parts of the IE-78K0-NS-PA main unit. the packing box contains the performance board, 2 external sense probes, 20 external sense clips, a packing list, the user?s manual, and a guarantee card. if there are any missing or damaged items, please contact an nec sales representative. please make sure to fill out and return the guarantee card that comes with the main unit.
chapter 2 part names user ? s manual u16109ej1v0um 17 2.1 parts of main unit figure 2-1. performance board j1 cn6b p2 cn7b cn4b cn5b p1 extcn1 extcn2 cnjtag1 cn6a cn7a cn4a cn5a < part side > < soldering side >
chapter 2 part names user ? s manual u16109ej1v0um 18 2.2 external sense probe names the IE-78K0-NS-PA includes external sense probes and external sense clips. (1) external sense probes: 2 table 2-1. correspondence between connector no. and color of cable connector no. 12345678910 color of cable brown red orange yellow green blue purple gray n.c. black the names of the external sense probes when they are connected to extcn1 and extcn2 are as follows. table 2-2. bit configuration when connecting external sense probe to extcn1 connector no. 12345678910 external sense ext1 ext2 ext3 ext4 ext5 ext6 ext7 ext8 n.c. gnd table 2-3. bit configuration when connecting external sense probe to extcn2 connector no. 12345678910 external sense ext9 ext10 ext11 ext12 ext13 ext14 ext15 ext16 n.c. gnd remark n.c.: no connection (2) external sense clips: 20 (16 for external sense probes, 2 for gnd, and 2 spares) made by sunhayato corporation (2 sets of 10) connector no. 10 9 8 7 6 5 4 3 2 1
user?s manual u16109ej1v0um 19 chapter 3 installation this chapter describes how to connect the IE-78K0-NS-PA to the ie-78k0-ns, emulation board, etc. caution connecting and removing cables or components from the target system and changing the settings of switches, etc. should be carried out after turning off the power supply of the ie system and the target system.
chapter 3 installation user?s manual u16109ej1v0um 20 (1) connecting emulation board (ie-780 -ns-em1) the ie-780 -ns-em1 is sold separately. figure 3-1. connecting emulation board (ie-780 -ns-em1) (1/2) <1> remove the screws from the sides of the main unit, and then remove the top cover. <2> remove the first and second plates from the bottom by removing the screws. <3> connect the IE-78K0-NS-PA and fix the spacers (metal) included with this product at five points on the board. fix here IE-78K0-NS-PA included spacer included spacer fix fix spacers 2 and 3 spacer 1 <4> connect the ie-780 -ns-em1 to the IE-78K0-NS-PA and fasten the two screws. <5> when using an emulation probe, connect the corresponding emulation probe. ie-780 -n s-em1 IE-78K0-NS-PA refer to (4) for the emulation probe connection method. refer to (3) for the external sense probe connection method. caution only when connecting the ie-78018- ns-em1 on the IE-78K0-NS-PA, remove spacer 1 (metal) of the following figure and replace spacers 2 and 3 (metal) with spacers (plastic) included with this product.
chapter 3 installation user ? s manual u16109ej1v0um 21 figure 3-1. connecting emulation board (ie-780 -ns-em1) (2/2) <6> replace the top cover and fasten the four screws on the sides. ie-780 -ns-em1 IE-78K0-NS-PA
chapter 3 installation user ? s manual u16109ej1v0um 22 (2) connecting i/o board (ie-78k0-ns-p0 ) and emulation board (ie-780 -ns-em4) the ie-78k0-ns-p0 and ie-780 -ns-em4 are sold separately. figure 3-2. connecting i/o board (ie-78k0-ns-p0 ) and emulation board (ie-780 -ns-em4) (1/2) <1> remove the screws from the sides of the main unit, and then remove the top cover. <2> remove the first and third plates from the bottom by removing the screws. <3> connect the IE-78K0-NS-PA and fix the spacers (metal) included with this product at five points on the board. <4> connect the ie-78k0-ns-p0 on the ie-78k0- ns-pa and fix the spacers included with the ie- 78k0-ns-p0 at the four corners. IE-78K0-NS-PA ie-78k0-ns-p0 IE-78K0-NS-PA included spacer included spacer fix fix fix here included spacer included spacer fix fix <5> connect the ie-780 -ns-em4 on the ie- 78k0-ns-p0 , and fasten the screws at the four corners. <6> when using an emulation probe, connect the corresponding emulation probe. ie-780 -ns-em4 IE-78K0-NS-PA ie-78k0-ns-p0 refer to (4) for the emulation probe connection method. refer to (3) for the external sense probe connection method.
chapter 3 installation user ? s manual u16109ej1v0um 23 figure 3-2. connecting i/o board (ie-78k0-ns-p0 ) and emulation board (ie-780 -ns-em4) (2/2) <7> replace the top cover and fasten the four screws on the sides. ie-78k0-ns-p0 IE-78K0-NS-PA ie-780 - ns-em4
chapter 3 installation user ? s manual u16109ej1v0um 24 (3) connecting external sense probe figure 3-3. connecting external sense probe performance board IE-78K0-NS-PA external sense probe (included 2) extcn1 extcn2 ground line (black) ground line (black)
chapter 3 installation user ? s manual u16109ej1v0um 25 (4) connecting emulation probe (np- ) np- is sold separately. figure 3-4. connecting emulation probe emulation probe (np- ) ie-780 -ns-em1 ie-78k0-ns ie-780 -ns-em4 ie-78k0-ns-p0 ie-78k0-ns IE-78K0-NS-PA IE-78K0-NS-PA emulation probe (np- ) caution the emulation probe (np- ) mounting location varies depending on the emulation board in use. for details, refer to the user?s manual of the corresponding emulation board.
user?s manual u16109ej1v0um 26 chapter 4 external sense specifications up to 16-bit data can be input to the IE-78K0-NS-PA from the target system via an external sense probe. also, when using an external event input, input a level of at least 2 cpu clocks. table 4-1. electrical specifications of external sense parameter min. [v] max. [v] input voltage, high target voltage note 0.7 target voltage note input voltage, low 0 target voltage note 0.3 note 2.0 v when the target voltage is less than 2.0 v.
user?s manual u16109ej1v0um 27 chapter 5 cautions (1) when debugging is performed by connecting the performance board IE-78K0-NS-PA to the in-circuit emulator ie-78k0-ns and the corresponding emulation board, use an in-circuit emulator or an integrated debugger that satisfies the following conditions. ? use an in-circuit emulator ie-78k0-ns with control code d or later. ? use version 2.00 or later of the integrated debugger id78k0-ns. (2) if it is set that dmm or snap shot occurs during the measurement section of the execution time, the execution time measurement value becomes larger than the actual value. { countermeasure: do not specify dmm or snap shot during the measurement section of the execution time. (3) when section trace is specified and then dmm or snap shot is specified, the trace data may not appear correctly. { countermeasure: do not set a dmm or snap shot event when performing a section trace. do not set a section trace when performing a dmm or snap shot event.
user?s manual u16109ej1v0um 28 [memo]
user?s manual u16109ej1v0um 29 [memo]
user?s manual u16109ej1v0um 30 [memo]
although nec has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that errors may occur. despite all the care and precautions we've taken, you may encounter problems in the documentation. please complete this form whenever you'd like to report errors or suggest improvements to us. hong kong, philippines, oceania nec electronics hong kong ltd. fax: +852-2886-9022/9044 korea nec electronics hong kong ltd. seoul branch fax: +82-2-528-4411 p.r. china nec electronics shanghai, ltd. nec electronics taiwan ltd. fax: +86-21-6841-1137 address north america nec electronics inc. corporate communications dept. fax: +1-800-729-9288 +1-408-588-6130 europe nec electronics (europe) gmbh market communication dept. fax: +49-211-6503-274 south america nec do brasil s.a. fax: +55-11-6462-6829 taiwan asian nations except philippines nec electronics singapore pte. ltd. fax: +886-2-2719-5951 fax: +65-250-3583 japan nec semiconductor technical hotline fax: +81- 44-435-9608 i would like to report the following error/make the following suggestion: document title: document number: page number: thank you for your kind support. if possible, please fax the referenced page or drawing. excellent good acceptable poor document rating clarity technical accuracy organization cs 02.3 name company from: tel. fax facsimile message

▲Up To Search▲

Price & Availability of IE-78K0-NS-PA

	To Download IE-78K0-NS-PA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .